• To get the Pansat 200a to give you the audio PIDs for "stacked" audio channels (where there are audio 1 through audio 11):
  • 1)Tune and scan the audio service in question, such as ABC on Satcom C5, 4047V sr=2500.
  • 2)You end up with 1 audio channel with audio 1 through audio 11.
    • There are actually 11 stereo audio channels.  Pressing Audio will change through each of the 11 audio carriers.
  • 3)tune to the channel assigned to the audio service.
  • 4)Tune to audio 1

  • 5)Press [ch. List] twice, highlight add and press [enter]
  • 6)PID for audio currently selected will be displayed along with all the other channel info.
  •  
  • 7)Arrow down to Channel Name, Put in a title and press [enter] then [exit].
  • Box should respond with a "channel is added" message.
    If it is not successful, it will say "    Fail to add channel"

  • 8)Press exit to leave the channel list, Tune to the next audio and repeat from step 5.
    repeat for the rest of the detected audio PIDs